H3C WA2600 Enhanced Series Fundamentals Configuration Guide

6-5
2) Download the batch file to the device. If the suffix of the file is not .bat, use the rename command
to change the suffix to .bat.
3) Execute the batch file.
Follow these steps to execute a batch file:
To do… Use the command… Remarks
Enter system view
system-view
—
Execute a batch file
execute
filename Required
Execution of a batch file does not guarantee the successful execution of every command in the batch
file. If a command has error settings or the conditions for executing the command are not satisfied, the
system will skip the command to the next one.
Memory Space Management
When some space of a storage medium becomes inaccessible due to abnormal operations, you can
use the fixdisk command to restore the space of the storage medium. The execution of the format
command formats the storage medium, and all the data on the storage medium is deleted.
Use the following commands to manage the storage medium space:
To do… Use the command… Remarks
Restore the space of a storage
medium
fixdisk
device
Optional
Available in user view
Format a storage medium
format
device
Optional
Available in user view
When you format a storage medium, all files stored on it are erased and cannot be restored. In
particular, if there is a startup configuration file on the storage medium, formatting the storage medium
results in loss of the startup configuration file.
Setting File System Prompt Modes
The system provides the following two prompt modes:
z alert: In this mode, the system warns you about operations that may bring undesirable
consequences such as file corruption or data loss.
z quiet: In this mode, the system does not ask confirmation for any operation.
To prevent undesirable consequence resulted from misoperations, the alert mode is preferred.

H3C WA2600 Enhanced Series Specifications

General

Brand	H3C
Model	WA2600 Enhanced Series
Category	Wireless Access Point
Language	English