H3C WA2600 Enhanced Series Fundamentals Configuration Guide

5-2
Controlling Telnet Users by SSIDs
This configuration needs to reference WLAN ACLs, the numbers of which range from 100 to 199. For
more information about ACLs, see ACL in the ACL and QoS Configuration Guide.
Follow these steps to control Telnet users by WLAN ACLs:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a WLAN ACL or enter
WLAN ACL view
acl number
acl-number
Required
For this command, the
config
keyword is specified by default.
Define rules for the ACL
rule
[ rule-id ] {
permit
|
deny
} [
ssid
ssid-name ]
Required
Return to system view
quit
—
Enter user interface view
user-interface
{ first-num1 [ last-num1 ] |
{
console
|
vty
} first-num2 [ last-num2 ] }
—
Apply the ACL to control
Telnet users by SSIDs
acl
acl-number
inbound
Required
The
inbound
keyword
specifies to filter the users
trying to Telnet to the current
access point.
Controlling Telnet Users by Source IP Addresses
This configuration needs to be implemented by basic ACL; a basic ACL ranges from 2000 to 2999. For
more information about ACLs, see ACL in the ACL and QoS Configuration Guide.
Follow these steps to control Telnet users by source IP addresses:
To do… Use the command… Remarks
Enter system view
system-view
—
Create a basic ACL or enter basic
ACL view
acl
[
ipv6
]
number
acl-number
[
name
acl-name ] [
match-order
{
auto
|
config
} ]
As for the
acl number
command,
the
config
keyword is specified by
default.
Define rules for the ACL
rule
[ rule-id ] {
deny
|
permit
}
[
fragment
|
logging
|
source
{ sour-addr sour-wildcard |
any
} |
time-range
time-range-name ] *
Required
Return to system view
quit
—
Enter user interface view
user-interface
{ first-num1
[ last-num1 ] | {
console
|
vty
}
first-num2 [ last-num2 ] }
—
Apply the ACL to control Telnet
users by source IP addresses
acl
[
ipv6
] acl-number {
inbound
|
outbound
}
Required
The
inbound
keyword specifies to
filter the users trying to Telnet to
the current access point.
The
outbound
keyword specifies
to filter users trying to Telnet to
other switches from the current
access point.

H3C WA2600 Enhanced Series Specifications

General

Brand	H3C
Model	WA2600 Enhanced Series
Category	Wireless Access Point
Language	English