8-6
Configuration procedure
If the available memory space of the master and slave is insufficient, use the fixdisk command to clear
the memory or use the delete /unreserved file-url command to delete the files not in use and then
perform the following operations.
# Log in to the server through FTP.
<Sysname> ftp 10.1.1.1
Trying 10.1.1.1
Connected to 10.1.1.1
220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user
User(10.1.1.1:(none)):abc
331 Give me your password, please
Password:
230 Logged in successfully
# Set the transmission mode to binary.
[ftp] binary
200 Type set to I.
# Download boot file newest.app from PC to the device.
[ftp] get test.bin
227 Entering Passive Mode (10,1,1,1,4,1).
125 BINARY mode data connection already open, transfer starting for / test.bin.
.....226 Transfer complete.
FTP: 5805100 byte(s) received in 19.898 second(s) 291.74K byte(s)/sec.
# Upload configuration file config.cfg of the AP to the server for backup.
[ftp] ascii
[ftp] put config.cfg back-config.cfg
227 Entering Passive Mode (10,1,1,1,4,2).
125 ASCII mode data connection already open, transfer starting for /config.cfg.
226 Transfer complete.
FTP: 3494 byte(s) sent in 5.646 second(s), 618.00 byte(s)/sec.
[ftp] bye
# Specify test.bin as the main boot file to be used at the next startup.
<Sysname> boot-loader file test.bin main
# Reboot the AP.
<Sysname> reboot
To Next Page
Loading...
Need help?
General
