Hach CA610 - Page 25

Table 7 Replacement tubing sets
Item Description Length Qty
1 Fitting, Barb,
1
/
16
I.D. to
1
/
8
I.D. — 2
2 Fitting, Barb,
1
/
16
I.D. to
1
/
16
I.D. — 2
3 Fitting, Tee, (2x) 0.093 I.D. to (1x) 0.062 I.D. Tubing — 2
4 Tubing,
1
/
16
I.D. x
3
/
16
O.D. 4.5 in. 2
5 Tubing,
1
/
16
I.D. x
3
/
16
O.D. 3.5 in. 1
6 Tubing, 0.028 I.D. x 0.158 O.D. 3.5 in. 1
7.6 Quick-connect fittings
The shut-off valve that comes with the installation kit has quick-connect fittings. If removal is
required, refer to Figure 14.
Figure 14 Remove the valve
7.7 Clean the sample screen
1. Remove the sample screen. Refer to Figure 15.
2. Use a soft brush to remove debris. Rinse with clean water.
3. Install the sample screen.
4. Select PRIME>ALL to do a Prime Sample cycle.
English
25