Figure 11 Sensor connections
1 Sensor port 1 4 Sensor port 4 (advanced model only)
2 Sensor port 2 5 Ring terminal for shield wires
3 Sensor port 3 (advanced model only) 6 Ground stud for shield wires (2x)
Table 4 Sensor wiring
Signal US9000 pHD
2
BL9000
AV9000S
Flo-Dar
3
SVS
Flo-Tote 3
Junction box
for US9000
6 DATA + Yellow Brown White White White White
5 DATA – Gray White Black Black Black Blue
4 DETECT — — Green/white Clear Orange —
3 V + Brown Blue Red Red Red Brown
2
The pH sensor requires an adapter cable 8308000
3
To connect to an intrinsically safe barrier, use the same wire colors that are used for the Flo-
Dar.
English 17
To Next Page
Loading...
