Troubleshooting
Use the diagnostic menu to see the recorded events and alarms and to find the possible source of a
problem.
1. Push MENU.
2. Select Diagnostics.
3. Select an option:
Option Description
Status Gives the number of logged channels, the active channel, totalizer info, and sensor port
connections.
Event Log Shows the total number of events and individual events.
Alarm Log Shows the total number of alarms and the individual alarms.
Sensor Ports Queries a sensor port to take a measurement or go to diagnostic logging interval of
1 hour, 1 day or 1 week.
Internal I/O Gives diagnostic information for the relays, inputs and outputs in the instrument.
Keypad Starts a test for the keypad to make sure that all of the keys operate correctly.
Display Starts a test for the display.
Data Log Used % Gives the percent of the used datalog memory.
Replacement parts and accessories
Note: Product and Article numbers may vary for some selling regions. Contact the appropriate distributor or refer to
the company website for contact information.
Replacement parts
Description Item no.
Cover assembly with latches, clear 8319100
Desiccant tube assembly, internal 8314000
Desiccant, bulk beads 8755500
Fuse, 3.15 A, 250 VAC 590765
Fuse, 10 A, 250 VDC 8309900
Latch for clear cover 8306900
Plug for air tube ports 8305800
Power cable, 115 VAC, 10 A, 2.4 m (8 ft) (US) 8317900
Power cable (EU) 8318000
Power cable (UK) 8318100
Power cable (AU) 8318200
Strain relief plugs, 11 mm (7/16 in.) diameter 6250700
USB Type A to B cable 8317800
USB Type A port cover 8306300
USB Type B port cover 8307500
42 English
To Next Page
Loading...
