Hach FL1500 - Show the Data as a Slideshow; Main Menu Overview

• Channels Logging—Shows the number of logged channels. Select Channels Logging to see the
measurement data for the logged channels. Use the right arrow to scroll through the measurement
data for all channels.
• Active Channel—Shows the active alarms. Select Active Channel to see the channel and system
alarms.
• Totalizers—Shows the totalizer data for the configured totalizers. Select Totalizers to see the flow
volume for the configured totalizers.
• Sensor Port—Shows the configured sensor ports. Select Sensor Port to see the configured
sensors and inputs.
Show the data as a slideshow
The user can configure the display to show the instrument data screens in a slideshow format. When
enabled, each screen shows for a user-selected time interval.
1. Push MENU.
2. Select General Settings.
3. Select Status Display Setup.
4. Select the options.
Option Description
Slideshow Enables or disables the slideshow. The enable option does not start the slideshow.
Slide Selection Selects one or more types of data to include in the slideshow. Options: Datalog Channels,
Alarms, Totalizer.
Slide Duration Selects the time period that each screen shows. Options: 5 to 60 seconds.
5. Push STATUS to start the slideshow. Each data screen shows for the selected slide duration.
6. Select one of the options during the slideshow:
Option Description
Pause Stops the slideshow. Select Start to continue the slideshow.
End Goes to the status screen. Push STATUS to start the slideshow again.
Main menu overview
Push the MENU key to see the main menu. Table 15 shows the main menu options.
Table 15 Main menu options
Option Description Option Description
Programming
Selects the channels to log and
the log intervals. Configures the
channel and system alarms.
Totalizers
Configures the settings for the
mechanical (externally attached) and
software totalizers.
Sensor Setup
Configures the sensor and
measurement parameters.
Hardware Setup
Sets the options for the logger, sensors,
totalizers, I/O type, sampler, and
communications protocol.
26 English