Figure 2 Typical system configuration
1 USB memory stick to USB A port 5 Flo-Tote 3 sensor cable
2 USB cable from PC to USB B port 6 Flo-Dar sensor cable
3 AC power cable 7 Surcharge velocity sensor (SVS) cable
4 Sampler auxiliary cable
N O T I C E
Damage to the logger and PC can occur if the PC is connected to the incorrect port on the logger. Connect the
PC only to the USB B port on the logger.
Product components
Make sure that all components have been received. Refer to Figure 3. If any items are missing or
damaged, contact the manufacturer or a sales representative immediately.
English
7
To Next Page
Loading...
