Note: The standard analyzer POLYMETRON Model 8810 ISE for chloride measurement supplied is a low range
version (0.02 - 5 mg/L chloride). For the high range version (0.5 - 500 mg/L chloride) make sure to include in the
order the related reference electrode (item number 368483,00000) for use with the analyzer.
There is a standard panel-mounted version. A wall–mounted polyester cabinet and a free–standing
cabinet to house the analyzer with the necessary reagents are also available. Liquid modules are
installed below the electronic control unit for protection, easy access and service tasks. The hinged
panel tilts forward to access to the rear. Refer to Figure 1 for product overview.
Figure 1 Front and rear view (panel mount illustrated)
1 Electronic unit 7 Space for additional pump 13 Power supply connection
2 Measurement chamber (refer to
Figure 2 on page 7)
8 Input/Output connections 14 Rinse valve
3 19 inch panel 9 Reagent pump cover 15 Sample valve
4 Main switch 10 Compressed air valve 16 Reagent canister
5 Peristaltic pump 11 Electronic unit (rear) 17 Level detector
6 Micro piston pump 12 Power supply box 18 Tube weight
Section 4 Measurement chamber
Refer to Figure 2 for measurement chamber components.
6
English
To Next Page
Loading...
