Figure 11 Clean sample detector, light shield and access cover
1 Sample detector 3 Optics access cover
2 Light shield
Figure 12 Clean trays and Chemkey slots
1 Tray 3 Barcode window
2 Optical window 4 Chemkey slot
10.4 Charge or replace the battery
Charge the battery when the battery power level is low. Replace the battery when the battery does
not hold a charge. Only use the specified battery supplied by the manufacturer. Refer to Install the
battery on page 7 and Replacement parts and accessories on page 22.
English
19
To Next Page
Loading...
