Figure 4 Sample vial overview
1 Measurement surface—Do not touch.
Prepare a sample vial
C A U T I O N
Chemical exposure hazard. Dispose of chemicals and wastes in accordance with local, regional and
national regulations.
N O T I C E
Always put a cap on the sample vial to prevent spills in the vial compartment.
Refer to the illustrated steps that follow to prepare a sample vial for measurement. Measure the
sample immediately.
Note: If there is contamination in the sample vial after it is rinsed with the sample, clean the sample vial. Refer to
Clean a sample vial on page 29.
English
19
To Next Page
Loading...
