GB
20 Modus 600RT
Second-Curtain Sync
The Second curtain sync (Rear curtain sync) can be
enabled from the camera. Please refer to camera
instruction manual for further details.
• When rear curtain sync is enabled it will not be displayed
on the modus 600RT speedlight. See LCD on camera.
• If you set a shutter speed as 1/320s (Auto FP) or 1/250s
(Auto FP) in the Nikon camera setting, <
> will be
displayed in the ash screen regardless of actual shutter
speed selected
• With high-speed sync, the faster the shutter speed, the
shorter the effective range
• To return to normal ash, set the camera ash sync speed
to other option other than Auto FP. Then the icon <
>
will no longer be shown when half pressing the camera
shutter button
• Multi- RPT mode cannot be set in high-speed sync mode
• Over-temperature protection may be activated after 15
consecutive high-speed ashes
1. Press < MODE >
button so that < M > is
displayed
2. Turn the Select Dial to
choose a desired ash
output amount
3. Press < SET > button
again to conrm the
setting
Flash Mode - Manual Flash
The ash output is adjustable from 1/1 full power to
1/128th power in 1/3rd stop increments. To obtain a
correct ash exposure, use a hand-held ash meter to
determine the required ash output.
To Next Page
Loading...
Need help?
General
