Hahnel modus 600rt - Multiple Master Unit; M: Wireless Flash Shooting with Manual Flash; Repeating Flash Stroboscopic

GB
Modus 600RT 31
Multiple Master Unit
You can use two or more cameras with master ash
units on each to change camera shooting while keeping
the same lighting setup (slave units) in wirelesss ash
photography.
M: Wireless Flash Shooting with
Manual Flash
This describes wireless using manual ash. You can shoot
with a different ash output setting for each slave unit
(ring group). Set all parameters on the master unit.
1. Setting the manual
ashmodeto<M>
• Press Function Button
4 <
Gr
> to choose
the group
• Then press Function
Button 3 <
MODE
> to
set the <M> mode
2. Settingmanualash
output power
• Press Function Button
2 <
>. Turn the
Select Dial to adjust the
ash output of the group
• Press <SET> button to
conrm
3. Setting individual group
ash output power
4. Each group M (Master
speedlight) / A / B / C
can be set individually
to different power level
• Set any group to <--->
to turn of the power of
this group
1. Setting <RPT>
stroboscopicash
• On the Master
Speedlight press
<MODE> button until
<RPT> is displayed
• Turn the Select Dial to
adjust the ash output
power. Press <SET>
button to conrm
RPT: Wireless shooting with Multi
repeatingashstroboscopic