Hahnel modus 600rt - Optical Wireless Transmission; Optical Control Setup and Modes

GB
34 Modus 600RT
Wireless Flash
Photography:
Optical Transmission
4
This product is compatible with Nikon Creative
Lighting System (CLS). It can function as either optic
wirelessmasterorslaveash.Asamasterunit,itcan
control Nikon Speedlight’s e.g. SB-900, and SB-910
via wireless. As a slave unit, it can be controlled by
wireless signals of Nikon Speedlight’s e.g. SB-910
andpop-upashcommandersofNikoncamerase.g.
D7100/D7000/D800
• You can set up one, two or three slave groups for i-TTL
II autoash shooting. With i-TTL II autoash, you can
easily create various lighting effects.
• Any ash settings (of ash exposure compensation,
high-speed sync, FE lock, FEB, manual ash, Multi
ash) on the master unit will be automatically sent to the
slave units. So the only thing you need to do is to set
the master unit to i-TTL mode without any operation for
the slave units at all during the shooting.
• This ash can work in i-TTL autoash, M manual ash,
and Multi stroboscopic ash modes when set as a
master unit.
Positioning and Operation Range
Indoors
Outdoors
15m(49.2ft)
10m(32.8ft)
80°
8m( 26.2ft) 12m(39.4ft)
MASTER
SLAVE
• Even with multiple slave units, the master unit can control
all of them via wireless.
• In this user manual, “master unit” refers to the speedlight
attached to the camera and “slave unit” will be controlled
by the master unit.
Wireless Settings
You can switch between normal ash and wireless ash.
For normal ash shooting, be sure to set the wireless
setting to OFF