Hahnel modus 600rt - Multi Mode; Sync Modes

GB
Modus 600RT 39
Multi Mode
• Press and hold the < Group A > button to select
the Multi mode <
MT
> icon. Use the <SEL> button,
Group Buttons and adjust dial to set the number of
ashes, ash frenquency and power output. Press the
<SEL> button again to lock selection
• For more detail on operation of the viper TTL visit www.
hahnel.ie
Sync Modes
• Press and hold the < Group B > button to select the
High Speed sync <
> icon will switch on
• Press and hold the < Group B > button again to go
back to normal sync
Ensure that high speed sync is also enabled in the
camerabysettingtheashsyncspeedto1/320’s(Auto
FP) or 1/250’s (Auto FP). Refer to camera manual for
more info