Hahnel modus 600rt - Page 29

GB
Modus 600RT 29
2. Slave Unit setting
• Set the slave Modus
600RT to <
SLAVE
>
setting (Page 26)
3. Position of camera
and speedlight
• Position the camera
with the master unit
attached and the Modus
slave within radio range
4. Set the Group
A
ash
mode to <i-TTL>
• Check that group <
A
> is set to <i-TTL>. If
not press <
MODE
>
button until <i-TTL> is
displayed
• Check that the slave
unit is set automatically
to <i-TTL> by the
master unit
5 Check Master/Slave
units are ready
• Check master
speedlight, ready
indicator is lighting and
that the slave ash
ready indicators are
blinking
6 Check the Master
slave speedlight
operation
• Press the master unit’s
<
> test button
• The slave speedlight
will ash. If it does not
re, check the position
or distance of slave
from master
• You are now ready to
take a photo with the
wireless ash lighting