9
6. Install the bottom decorative strip
Open the door of refrigerating chamber, take out the decorative strip from the
chamber, and install it to the shown location, and x it with screw.
(2 screws are provided with the product)
Caution
Please wear gloves when dismantle the bottom decorative strip and adjustable
leveling legs to avoid injury to your hands.
7. Disassembly and Assembly of the Handle of Refr. Door
At the rst, remove the handle connector, and pinch the connector to the hole on the
door shell (Fig. 1). Take out one refr. handle, align the hole on the handle head to the
connector and install the handle to the connector. Take out inside-hexagonal spanner,
and use it to pinch the cap screw tight on the handle head (Fig. 2).
The handle can be dismantled by reverse steps.
8. Disassembly and Assembly of the Handle of Freezer Door
At the rst, remove the handle connector, and pinch the connector to the hole on the
door shell (Fig. 3). Take out one freezer handle, align the hole on the handle head
to the connector and install the handle to the connector. Take out inside-hexagonal
spanner, and use it to pinch the cap screw tight on the handle head (Fig. 4).
The handle can be dismantled by reverse steps.
Preparation
(Fig. 1)
(Fig. 2)
(Fig. 3)
(Fig. 4)
To Next Page
Loading...
