11
Getting Started
1. Power On
Immediately after the power on, the temperature is displayed as the actual temperature of the
refrigerating and freezing chamber. At this time, the set temperature for refrigerating is 5t, the set
temperature for freezing is -IffC, the buttons are in unlocked stutus.
The refrigerator has Power Outage Memory function. At every power on after the rst power on the
refrigerator will run under the settings set at the last time. (See Power Outage Memory Function
for details)
2. Operation Mode of the Refrigerator
Caution
Within the applicable temperature range of the refrigerator, as long as you
selected the Fuzzy Mode, you will not need to adjust other settings to maintain
the best freezing effect regardless of the ambient temperature changes. Make
you worry less and work less.
You may select one of the two modes bellow to set your refrigerator as needed.
(1) Fuzzy Mode: We recommend using the Fuzzy Mode, if where is no special need. (See Fuzzy
Function Setting for details)
(2) Manual Mode: The temperature can be set by using temperature control button. (See
Temperature Setting and Adjustment for details)
3. Put the food into your refrigerator
After running for a while, the inside of the refrigerator is sufciently
cooled At this time, food can be put into the refrigerator.
Note: small freezer drawer may be removed before putting food into
large freezer drawer in order to put more food.
4. If you have lots of fresh food (such as fresh meat) put
intoFreezing Chamber, please start Super Freezing function
12 hour before.
Caution
When the temperature setting changes, the inner temperature will be balanced
after a while.The length of the period depends on the changes made to the
temperature setting, the ambient temperature, door-open times, and the food
Caution stored in the refrigerator.
To Next Page
Loading...
