Installation
How to connect
1. To get the best picture quality, adjust the PC graphics card to 1024
2. Use the TV`s VGA or DVI (Digital Visual Interface)Audio IN port for video connections, depending on your
VGA connector.
If the graphic card on the PC does not output analog and digital RGB simultaneously, connect only one of
either VGA r HDMI/DVI IN to display the PC on the TV.
If the graphic card on the PC does output analog and digital RGB simultaneously, set the TV to eithe VGA
DVI; (the other mode is set to Plug and Play automatically by the TV.)
3. Then, make the corresponding audio connection. If using a sound card, adjust the PC sound as required.
How to use
1. Turn on the PC and the TV.
2. Turn on the display by pressing the POWER button on the TV's remote control.
3. Use INPUT on the remote control to select PC or HDMI source.
4. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast or
brightness in PC mode. If noise is present, change the PC mode to another resolution, change the refresh rate to
another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic
card.
Note
1.Use a HDMI to DVI cable.
2.Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become
permanently imprinted on the screen.
3. The synchronization input form for Horizontal and Vertical frequencies is separate.
x768 .
IN o
r or
HDMI/
Resolution
Frame
frequency
(Hz)
VGA
SVGA
XGA
60Hz
800x600
1024x768
60Hz
60Hz
Mode
Resolution
75Hz
75Hz
VGA connection
VIDEO
OPTICAL
COMPONENT IN
AV IN
Pr/Cr
SVIDEO
PC AUDIO
AUDIO
AUDIO
AUDIO
AUDIO OUT
PC IN
HDMI/DVI IN
ANT IN
Connection Instructions
640x480
1280x1024
1280x768
1920x1080
8
To Next Page
Loading...
Need help?
General
