Introduction
The remote control cannot be operated unless the batteries are properly loaded.
When using the remote control, aim it at the remote control sensor on the TV.
Function introduction
Remote Control
1.Press to turn on and off the TV
2.Press repeatedly to cycle through the available
picture modes
3.Press to change the aspect ratio
4.Select a closed caption option
5.Show the input source
6.Press to open the on-screen menu
7.Volume/Channel Selection
8.Exit On Screen Display
9.
10.Press to display the TV status information on the top
of the TV screen
11.Shows program schedule in TV
12.Press to cycle through different sound settings
13.Press to display the sleep timer option
14.Select MONO, STEREO, SAP in NTSC system
15.Press to change a channel
16.Press to select digital channels. For example, to
enter “54-3”, press “54”, “- ” and “3”.
17.Switches the TV sound on or off
18.Accesses the highlighted item in the on-screen menu
19.Open the channel list in TV
20.Open the favorite channel list in TV
no available
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
To Next Page
Loading...
Need help?
General
