Operation
Menu Operations
In this manual, the OSD (On Screen Display) may be differ from your TV.
These are examples to illustrate the TV's operation.
Press INPUT to select the input source. The menu for each source may be different .
1 Press MENU button to display the main menu, and VOL+/- to select the main menu .
2 Press CH-/OK button to enter the menu and CH+/- to go up and down to select the desired option .
3 Press VOL+/OK button to confirm and VOL+/- to make changes to the parameters.
4 Press EXIT/MENU button to exit the menu.
Picture Menu Options
The TV menu gives you an overview of the menus you can select.
Note
Depending on the input signal, one or more menu items may not
be selectable.
1 Press MENU ,then press VOL+/- to select PICTURE menu.
2 Press CH-/OK, then press to select an option.
3 Press , the m opens. then press to
adjust the option.
How to customize your own picture status
CH+/-
VOL+/OK enu VOL+/-
MOVE
SELECT PREVIOUS EXIT
OK
MENU
EXIT
PICTURE
AUDIO
CHANNELS
SETTINGS
Picture
Standard
50
50
50
0
50
Mode
Brightness
Contrast
Color
Tint
Sharpness
VOL
-
VOL
+
CH+
CH-
Adjust settings to affect picture quality
Mode
Select the picture mode. You can select Vivid/Standard/Energy Savings/Theater/Sports/Custom.
You can also press PICTURE on the remote control to select the picture Mode.
Brightness
Contrast
Color
Tint
Sharpness
Reset to Default Re
Adjusts the brightness.
Adjusts the contrast.
Adjusts the color saturation.
Adjusts the image tint.
Adjusts the sharpness.
Lets you set the following:
• Aspect Ratio Select Normal, Zoom, Wide, Cinema, or Auto Zoom.
• Overscan Turn this On to adjust the picture’s reproduction rate when receiving DVI signals in VIDEO format.
Available when the signal uses EIA timing(480i/480p/720p/1080i/1080p).
• Color Temperature Select Warm (increased red), Normal, or Cool (increased blue).
• Backlight Adjusts the overall brilliance of the screen.
• Noise Reduction Selects the noise reduction mode to reduce picture noise (snow). Choose High, Middle,
Low, or Off.
• Advanced Contrast Turn this On to optimize the picture display for a more vivid image.
sets all picture settings to factory default.
Advanced Video
To Next Page
Loading...
Need help?
General
