9. TROUBLE SHOOTING GUIDE
Before checking the inside of the FX-888D or replacing parts, be sure to disconnect the power plug.
● The Heater- error is
displayed.
Is the heater broken?
If the heater is broken, replace the heating element.
If the cord assembly is broken, replace the HAKKO FX-8801. If the
heating element / sensor is broken, replace the heating element.
If the cord assembly is broken, replace the HAKKO FX-8801.
Is the iron temperature adjusted correctly?
Perform the temperature adjustment.
Is the iron temperature adjusted correctly?
Perform the temperature adjustment.
To Next Page
Loading...
