HAKO 980 E/EH - Page 56

Daily
after first
every 100 every 200
Visual check of V-belts X
Check service/parking brake and re-adjust if required X
Check filter system for tightness (visual check) X
Dismount plate filter and clean if required X
Clean travel drive assembly, brush drive, shaking motor X
Check tread of wheels X
Check function of electro-motor, carbon brushes for smooth
operation and wearing; clean motor from carbon dust and replace
carbon brushes if required
500 X
Check carbon brushes of travel drive assembly (to be executed
by qualified personnel only)
500 X
Check hydraulic hoses and replace if required
Check hydraulic fluid level for lifted-up disposal and refill if
required
X
Check tensioning moment of fixing screws for lifted-up disposal
facility and re-tighten if required (49 Nm)
5X
Check tension of steering chain and re-adjust tension if required X
7.13 Hako-Jonas 980 E/EH Maintenance
Schedule (6502.40/60)
hours of operation
56
Maintenance/Service
Daily
after first
every 100 every 200
Visual check of V-belts X
Check service/parking brake and re-adjust if required X
Check filter system for tightness (visual check) X
Dismount plate filter and clean if required X
Clean travel drive assembly, brush drive, shaking motor X
Check tread of wheels X
Check function of electro-motor, carbon brushes for smooth
operation and wearing; clean motor from carbon dust and replace
carbon brushes if required
500 X
Check carbon brushes of travel drive assembly (to be executed
by qualified personnel only)
500 X
Check hydraulic hoses and replace if required
Check hydraulic fluid level for lifted-up disposal and refill if
required
X
Check tensioning moment of fixing screws for lifted-up disposal
facility and re-tighten if required (49 Nm)
5X
Check tension of steering chain and re-adjust tension if required X
7.13 Hako-Jonas 980 E/EH Maintenance
Schedule (6502.40/60)
hours of operation
56
Maintenance/Service