17
Operation
2.2.4 Installing the trough battery
1. Switch off the vehicle with the key
switch and secure it by applying the
parking brake.
2. Open the seat console (Fig. 5/1).
3. Install the battery (Fig. 5/2) in the
battery trough accordance with illus-
tration.
Replacing/Installing is only
possible with the aid of a crane
and appropriate lifting gear.
Please read the information
provided in the operating man-
ual of the battery manufactur-
er. Trough batteries weigh up
to 280 kg. For reasons of safe-
ty, we strongly recommend
having this work completed at
an authorized Hako service
center.
4. Check the battery plug (Fig. 5/3),
refer to Section 2.2.6.
Fig.5
To Next Page