24
Operation
2.3.4 Filling the clean water tank
1. Fill the clean water tank (Fig. 11/1)
before starting work or as necessary.
Park the vehicle on a level floor area.
2. Open the tank cap (Fig. 11/2) and fill
the clean water tank through the
opening (Fig. 11/3) (max. tempera-
ture 50°C).
3. Mix the cleaning agent in accor-
dance with the manufacturer's in-
structions.
Only use cleaning agents ap-
proved by Hako for their ven-
dors (non-foaming). These
products meet the require-
ments stipulated in the wash-
ing and cleaning agent direc-
tive (WRMG - Wasch- und
Reinigungsmittelgesetzes).
Fig.11
To Next Page
Loading...
