Hama DIR3110MS - Software Update; Setup Wizard; Info

35
System settings

Factory Reset
Conrm the following prompt with YES to reset the radio
to the factory default settings.
All settings made previously aredeleted.
Note
• Resetting to the factory default settings can solve
some problems and malfunctions.
• However,all settings made previously,such as custom
equaliser presets, favorites, and network proles, are
permanently deleted.
15.6 Software update
We areconstantly developing new softwarefeatures
and improvements for our radios to x problems, add
functionality,etc.
We recommend that you keep your radio’s softwareupto
date.
• Proceed as follows:
[menu]
System settings

Softwareupdate
• Set Auto-check setting to YES to have the radio
automatically check for new softwareupdates at regular
intervals. (Recommendation)
• Choose Check now to manually start acheck for
softwareupdates.
Warning
• Make surethat the radio has astable power supply
beforeyou start asoftwareupdate.
• Power supply failureduring asoftwareupdate can
cause irreparable damage to the radio.
15.7 Setup wizard
Youcan restart the setup wizard(5.4.1. Setup wizard)at
any time by proceeding as follows:
[menu]
System settings

Setup wizard
15.8 Info
• To have the radio display current information about
its hardwareand software(version numbers, device
designation, radio ID, etc.), proceed as follows:
[menu]
System settings

Info
• If you have already registered your radio on the
online portal of Frontier Silicon
(http://www.wiradio-frontier.com), then you can
nd out the radio ID there, as well.