GENERAL
4 © HAMM AG 2009
1.2 USE
1.2.1 Intended use
The machine may only be deployed on surfac-
es that can support it. It is intended solely for
deployment for compressing loose surfaces,
road foundations, road surfaces and similar
compactible foundations. Any other deploy-
ment or a deployment beyond this is not
deemed as intended. The manufacturer/suppli-
er is not liable for any damage resulting from
this. The user will bear the complete risk.
The intended use also includes the observ-
ance of the operating instructions as well as
the compliance with the inspection and mainte-
nance requirements set out by the manufactur-
er.
This machine has been built according to the
state-of-the-art and the generally accepted
safety regulations. However, danger for life
and health of the user or impairment of the ma-
chine and of other objects can arise during the
use of the machine.
This machine may only be used in technically
unobjectionable condition, as well as according
to the intended use, and aware of safety issues
and possible dangers, always observing the
operating instructions. All safety devices re-
moved for transport purposes (anti-rollover de-
vice ROPS, handles, silencers etc.) must be in-
stalled to the machine prior to using it. In par-
ticular, any troubles which could have effect on
safety must be eliminated immediately.
Arbitrary changes will exclude the manufactur-
er's liability for any damage resulting from this.
To Next Page
Loading...
