© HAMM AG 2009 69
MAINTENANCE
3.7 MAINTENANCE ONCE EVERY 250 OPERATING HOURS
(see also engine operating instructions)
Perform all maintenance work as described
under 10 operating hours. Additionally:
3.7.1 Lubricate articulated frame
steering joint
• Lubricate lubricating nipple A.
3.7.2 Lubrication of steering cylinder
rod
• Lubricate lubricating nipple A.
Danger of injuries!
Any work in the danger area of the articu-
lated frame steering may only be per-
formed with the engine at a standstill and
with the electric system switched off. Fur-
thermore, the articulated frame steering
blocking device must be latched.
Only lubricants with this identification are
admissible, see lubricant indications 3.2.
15005-10
A
Danger of injuries!
Any work in the danger area of the articu-
lated frame steering may only be per-
formed with the engine at a standstill and
with the electric system switched off! Fur-
thermore, the articulated frame steering
blocking device must be latched.
Only lubricants with this identification are
admissible, see lubricant indications 3.2.
15006-10
A
To Next Page
Loading...