Hamm HD 8 VV - Control of Radiator; Control of the Scrapers

MAINTENANCE
70 © HAMM AG 2009
3.7.3 Control of radiator
• Check the cooling fins of the radiators for
contamination.
If the cooling fins are contaminated they must
be cleaned thoroughly and immediately.
• Clean the radiator with a pressure washer.
3.7.4 Control of the scrapers
Check whether the scrapers have proper con-
tact to the drums. Adjust if necessary.
• Loosen hexagon screws A.
• Push the scraper console to the drum until
the scrapers make contact.
• Tighten the hexagon screws.
15007-10 15008-10
A