MAINTENANCE
54 © HAMM AG 2009
3 MAINTENANCE
3.1 INTRODUCTION
3.1.1 General
This machine requires care and maintenance
like any other technical device. The extent and
the frequency of the maintenance work de-
pends essentially of the operating and deploy-
ment conditions, which are very different in
many cases. In case of more difficult operating
conditions, the machine must have mainte-
nance in shorter intervals as scheduled for nor-
mal operation.
The maintenance intervals are determined ac-
cording to the running time of the operation
hours counter; for this, additional maintenance
work has to be performed during the running-in
time according to the running-in regulations.
The works necessary for care and the conser-
vation of the operational safety of the machine
are listed in the following sections. The run-
ning-in regulations, the maintenance intervals
and the care measures for the diesel engine
can be found in the operating instructions of
the engine manufacturer and must be ob-
served.
Specialist knowledge is necessary for the exe-
cution of some inspection and maintenance
works; these cannot be given in the scope of
these operating instructions. We recommend
to have these works performed by trained spe-
cialised staff.
To Next Page
Loading...
