EasyManua.ls Logo

Hammond Sk PRO - FILTER EG Parameters

Hammond Sk PRO
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
PIANO / ENSEMBLE Voice Sections58
From the screen shown at the bottom of the previous page, press the DIRECTIONq” button once.
The box to the right ofEG VEL TRK” should be highlighted.
EG VEL KEY TRACK
This Parameter allows you to adjust the amount of the Filter Envelope by Note “ON” or “OFF” velocities.
You can select from 0 to 100. A lower key velocity will produce less of a Filter EQ. A higher velocity will
produce a more pronounced EQ.
Turn the VALUE knob to the right to increase the amount of Key Tracking.
Turn the VALUE knob to the left to decrease the amount of Key Tracking.
From the above screen, press the PAGE u button once. The FILTER EG Page should now display.
The box to the right ofATTACK RATE” should be highlighted.
FILTER EG
The Filter Envelope Generator allows you to control how the Filter will change the sound over time.
ATTACK RATE
This Parameter allows you to adjust the time for the Cutoff Frequency to increase to its peak value
beginning when a key is depressed. You can select from 0 to 127.
Turn the VALUE knob to the right to increase the Rate.
Turn the VALUE knob to the left to decrease the Rate.

Other manuals for Hammond Sk PRO

Related product manuals