PIANO / ENSEMBLE Voice Sections 13
t GENERAL Parameters
LOUDNESS
VOLUME
This Parameter allows you to adjust the overall volume of the selected Patch. You can select from 0 (no
Volume) to 127 (maximum Volume).
Turn the VALUE knob the right to increase the Volume.
Turn the VALUE knob to the left to decrease the Volume.
NOTE: The Loudness Parameter serves to set the maximum volume of the selected ORGAN Patch and works
independently of the PIANO and ENSEMBLE VOLUME knobs. The overall volume of the PIANO or ENSEMBLE
Voice Section is controlled by the VOLUME knob for each Voice Section. The MASTER VOLUME knob and/or
a connected Expression Pedal will control the volume of the entire instrument.
From the screen shown on the previous page, press the DIRECTION “q” button once.
The box to the right of “RANGE UP” should be highlighted.
PITCH BEND
RANGE UP
This Parameter allows you to adjust the number of semitones the Pitch Bend Wheel will bend the pitch of
the selected Patch up. You can select from 1 to 12 semitones, 12 semitones being a full octave.
Turn the VALUE knob to the right to increase the Range.
Turn the VALUE knob to the left to decrease the Range.
To Next Page
Loading...
