PIANO / ENSEMBLE Voice Sections34
From the screen shown on the previous page, press the DIRECTION “q” button once.
The box to the right of “VOLUME” should be highlighted.
VOLUME
This Parameter allows you to adjust the Volume of the selected Component. You can select from 0 (no
volume) to 127 (maximum volume).
Turn the VALUE knob to the right to increase the volume.
Turn the VALUE knob to the left to decrease the volume.
From the above screen, press the DIRECTION “q” button once.
The box to the right of “OUTPUT BUS” should be highlighted.
OUTPUT BUS
This Parameter allows you to select whether Section Effects are enabled or disabled for this Component.
Turn the VALUE knob to select Dry (disabled) or Effect (enabled).
To Next Page
Loading...
