PIANO / ENSEMBLE Voice Sections48
From the screen shown at the bottom of the previous page, press the DIRECTION “q” button once.
The box to the right of “EG DEPTH” should be highlighted.
SUSTAIN LEVEL
This Parameter allows you to adjust the main level which will remain until the key is released. You can
select from 0 to 127. A higher value will set a higher pitch as the Breakpoint.
From the above screen, press the DIRECTION “q” button once.
The box to the right of “REL RATE” should be highlighted.
RELEASE RATE
This Parameter allows you to adjust the time for the level to fade from the Sustain Level to zero after the
key is released. You can select from 0 to 127. A higher value will result in a longer Release time.
Turn the VALUE knob to the right to increase the Release Rate.
Turn the VALUE knob to the left to decrease the Release Rate.
To Next Page
Loading...
