*#1 :-Owner’s Manual
52
SHORT CUT TO THE FUNCTION MODE
Each button on the panel has a “SHORT-CUT” capability, so that you can easily
go to each Function mode. By holding down the button, you can easily go to the
desired mode display. The “SHORT-CUT” mode can save time by going directry
to the parmeters you want to change.
For example, if you want change the Percussion setting, you can go
to the PERCUSSION FUNCTION MODE display, by holding
down either [SECOND], [THIRD], [FAST], or [SOFT] for a few
seconds. This enables the “SHORT CUT” mode.
Short-cut buttons will be explained in the next Chapter “SETTING
THE PARAMETER”.
NOTE: You can change the time for holding down the button for “SHORT
CUT”. (P. 61)
STORING THE PAGE YOU FREQUENTLY USE
You can store the page which your usually use, and go to that page by only touch-
ing the [CONTROL] button.
Example of operation: Storing the Drawbar - Pedal Function
1
2
Go to the page to be stored by using MENU etc.
Touch and hold the [REC/JUMP] , and touch the [CON-
TROL] button.
Next time, you can come to this page by only touching the
[CONTROL] button.
Example of operation: Move to the Percussion Function Mode.
Touch and Hold
Touch with
Press and
Hold
To Next Page
Loading...
Need help?
General
