MIDI
77
MIDI CHANNEL
MIDI has the “MIDI CHANNELS” 1 - 16. Thus, you can send your playing information
divided into 16 channels through one MIDI cable.
However, the channel must match between the sender and the receiver. Otherwise, you can
not “hear” what the other “says”.
MAJOR MIDI MESSAGE
The MIDI infomation is grouped into the channel message for each of the 16 channels and
the system message for the total channels. The main MIDI message is as follows: See for
details in the MIDI IMPLEMENTATION CHART.
CHANNEL MESSAGE
NOTE ON
This is for the 3 datafunctions: which key (Note Number), at what Speed (Velocity) and
Play (Note ON).
The sound engine of this keyboard receives velocity only for Percussion and Pedal.
Manual Drawbars play at a certain volume, regardless of the velocity.
PROGRAM CHANGE
KEYBOARD CHANNEL:
Switches the Combination Presets.
EXTERNAL ZONE:
Switches the program of the External Sound Modules.
CONTROL CHANGE
Data will be sent/received corresponding to the action of the Expression Pedal, Foot
Switch, Modulation, etc.
SYSTEM MESSAGE
SYSTEM EXCLUSIVE MESSAGE
These messages are for sending and receiving the characteristic data between the same
models or the products made by the same manufacturer.
This keyboard has the Memory Dump (transmit the all of setup) and can record the data to
the External Sequencer.
To Next Page
Loading...
Need help?
General
