Handicare SEDEO PRO+ - Page 22

22 Adjustments (to be carried out by a professional) Sedeo Pro+
B
A
C
D
D
E
2
A
B
b
a
1
Armrest width (2)
To remove:
1. Remove (A) and (B).
2. Remove (C) and (D).
To position:
3. Slide (D) onto (E).
Note!
Ensure that the ridge on the terminal block
falls into the opening
4. Adjust the depth of (D) and tighten (A).
5. Position the controller bracket and tighten
(B).
Armrest width (3)
1. Loosen (A).
2. Position (B) into the desired position
a Left: Reduce armrest width
Right: Enlarge armrest width
b Left: Enlarge armrest width
Right: Reduce armrest width
3. Tighten (A).