Handicare SEDEO PRO+ - Adjusting the Centre of Gravity

Adjustments (to be carried out by a professional) 23Sedeo Pro+
A
B
A
b
c
a
B
C
B
A
1
C
Armrest horizontal angle
1. Loosen (A).
2. Adjust (B) to desired position
By positioning (A) into different sliders of
(C) an additional horizontal angle can be
achieved
Side cushion
Adjust the side cushion as follows:
1. Loosen the Torx screw.
2. Adjust the part ot the desired position.
3. Tighten the Torx screw
A/a. Height adjustment
B/b. Width adjustment
C/c. Depth adjustment
5.8 Adjusting the centre of gravity
Warning!
Changing the wheelchair´s centre of gravity
may negatively infl uence the wheelchair´s
driving characteristics and/or its dynamic
stability. Such adjustments should be made
by professionals only.
1. Loosen (A) by one turn.
2. Slide (B) forwards or backwards.
3. Tighten (A).
Note!
If the user’s weight distribution is average,
then the centre of gravity should be adjusted
to the same setting as the seat depth.
For better sliding release the seat depth
adjustment