Use 9Sedeo Pro+
2
B
A
1
2
B
A
1
1
A
Sideways transfer
Folding back the armrest assembly
1. Fold (A) to the rear.
Caution!
Remove the tray before folding back the
armrest assembly.
4.3 Options / accessories
Removing/positioning the headrest
1. Loosen (A) by one turn.
2. Slide (B) out of or into the receiver.
3. Tighten (A).
Note!
Always slide the headrest until it comes to a
stop in the bracket.
Removing the side cushion
1. Loosen (A) by two turns
2. Slide (B) up
3. When replacing the side cushion, tighten (A)
by two turns
To Next Page
Loading...
