SAFETY
-1-
§1 Safety
Welding and cutting equipment can be dangerous to both the operator and
people in or near the surrounding working area, if the equipment is not
correctly operated. Equipment must only be used under the strict and
comprehensive observance of all relevant safety regulations. Read and
understand this instruction manual carefully before the installation and
operation of this equipment.
§1.1 Symbols Explanation
The above symbols mean warning!
Notice! Running parts, getting an electric shock or making contacts with
thermal parts will cause damage to your body and others. The underline
message is as follows:
Welding is quite a safe operation after taking several necessary
protection measures!
§1.2 Machine Operating warnings!
The following symbols and words explanations are for some damages to
your body or others, which could happen during the welding operation. While
seeing these symbols, please remind yourself and others to be careful.
Only people who are trained professionally can install, debug, operate,
maintain and repair the welding equipment covered with this Operator’s
Manual!
During the welding operation, non-concerned people should NOT be
around, especially children!
After shutting off the machine power, please maintain and examine the
To Next Page
Loading...