18
for a modification or alteration to a
powered industrial truck, however, that
the user must do the following:
– Arrange for the modification or
alteration to be designed, tested
and implemented by an
engineer(s)；
– Maintain a permanent record of the
design, test(s) and implementation of the
modification or alteration;
– Make appropriate changes to the
capacity plate(s), decals, tags and
instruction manual;
– Affix a permanent and readily visible
label to the truck stating the manner in
which the truck has been modified or
altered, together with the date of the
modification or alteration and the name
and address of the organization that
accomplished those tasks.
To Next Page
Loading...
