HANKISON HBP3200

SERVICE DEPARTMENT : (724) 746-1100
BLOWER PURGE
DESICCANT
COMPRESSED
AIR DRYERS
INSTRUCTION MANUAL
HBP SERIES
Contents
1.0 General Safety Information ........................... 2
2.0 Receiving, Storing, and Moving ..................... 2
3.0 Description .................................................... 3
4.0 Installation ..................................................... 3
5.0 Instrumentation .............................................. 8
6.0 Operation ....................................................... 12
7.0 Maintenance .................................................. 29
8.0 Troubleshooting ............................................. 31
Drawings
P&ID Schematic Models 500 through 600 ............ 34
P&ID Schematic Models 750 through 4300 .......... 36
Electrical Schematic – 460VAC, 3 phase .............. 38
Electrical Schematic – 575VAC, 3 phase .............. 39
Electrical Schematic – 380VAC, 3 phase .............. 40
Electrical Schematic – 415VAC, 3 phase .............. 41
Electrical Data – Fusing & Wire Sizing .................. 42
WARRANTY .......................................................... 44
MODELS
RATED
FLOW
MODEL
REFERENCE
HBP500
HBP600
HBP750
HBP900
HBP1050
500 SCFM
600 SCFM
750 SCFM
900 SCFM
1050 SCFM
500
600
750
900
1050
HBP1300
HBP1500
HBP1800
HBP2200
HBP2600
1300 SCFM
1500 SCFM
1800 SCFM
2200 SCFM
2600 SCFM
1300
1500
1800
2200
2600
HBP3200
HBP3600
HBP4300
3200 SCFM
3600 SCFM
4300 SCFM
3200
3600
4300
3158050 Rev. E 1/08
XX-XXX-X
Internal Use Only
3158050e / 080102

HANKISON HBP3200 Specifications

General

Brand	HANKISON
Model	HBP3200
Category	Dehumidifier
Language	English

Summary

General Safety Information

Receiving, Storing, and Moving

Guidelines for inspecting, storing, and safely handling the dryer unit.

Installation

System Arrangement

Recommendations for dryer placement relative to other system components.

Electrical Connections

Instructions for making electrical connections to the dryer.

Instrumentation

Energy Management System

Overview of the optional system that optimizes dryer operation for energy savings.

Operation

Operating Modes

Explains the different automatic and manual modes for dryer operation.

Operating Sequence Description

Step-by-step explanation of the drying and regeneration cycles.

Control Board Jumpers

Configuration options for the dryer type, energy management, and dew point settings.

Operator Interface

Information on the front panel interface, LEDs, switches, and display.

Alarm & Service Mode

Explanation of how the controller indicates and manages alarms and service reminders.

Start-up

Steps for initial dryer setup, pressurization, and bringing it online.

Operational Check Points

Procedures for verifying dryer functionality during operation.

Dryer Shut Down

Steps for safely shutting down and depressurizing the dryer.

Loss of Power

Describes how dryer valves react and sequence resumes after power interruption.

Maintenance

Desiccant Replacement

Guidelines on desiccant replacement frequency, procedure, and quality.

Troubleshooting

Warranty