Hanna Instruments HI 88703 User Manual

16
RANGE SELECTIONRANGE SELECTION
RANGE SELECTIONRANGE SELECTION
RANGE SELECTION
The HI 88703 instrument has two measuring
ranges: Ratio Turbidity, Non Ratio Turbidity. When
the instrument is in the main screen, the selected
range is displayed in the right side of the LCD, on
the message line.
To change the range, press the RANGE key.
When the display shows the Change parameter
screen, press UP or DOWN keys until the new
range is highlighted.
Press “CFM” functional key to select the new range.
The instrument returns to the main screen.
TUTORIAL MODETUTORIAL MODE
TUTORIAL MODETUTORIAL MODE
TUTORIAL MODE
The HI 88703 has a unique Tutorial Mode that provides additional information to help the unexperienced
user during the measurements. The instruments display a screen, with explanations and confirmation
button, each time when a preparation or other operation has to be performed by the operator. The
instrument resumes the measuring sequence when the operator confirms that the requested operation
was done.
To disable this mode, when in the main screen,
press the SETUP key to enter the setup, and then
press DOWN key until the “Tutorial” line is
highlited. Press the “Disable” functional key and
then press ESC to return to the main screen.

Hanna Instruments HI 88703 Specifications

General

Brand	Hanna Instruments
Model	HI 88703
Category	Measuring Instruments
Language	English