Hanna Instruments HI 88703 User Manual

27
In the Setup mode, the instrument’s parameters, could be changed. Some parameters affect the measuring
sequence and others are general parameters that change the behaviour or appearence of the instrument.
The setup mode may be accessed from the main screen by pressing the SETUP key.
Press ESC or SETUP to return to the main screen.
A list of setup parameters will be displayed with currently
configured setting. Press HELP for aditional information.
Press the arrow keys to select the parameter and
depending to the parameter type, select the new
value as follows.
Backlight
Values: 0 to 8.
Press “Modify” functional key to access the
backlight value.
Use the UP or DOWN keys (alternatively, the
“Right” or ”Left” functional keys) to increase or
decrease the display constrast.
Press “Accept” functional key to confirm or ESC to return to the setup menu without saving the new value.
Contrast
Values: 0 to 20.
This option is used to set the display’s contrast.
Press “Modify” functional key to change the display’s contrast.
Use the UP or DOWN keys (alternatively, the “Right” or
”Left” functional keys) to increase or decrease the value.
Press “Accept“ functional key to confirm the value or ESC
to return to the setup menu without saving the new value.
Average
Option: Enabled or Disabled.
This option is used to enable/disable averaged
measuring mode. If enabled, the instrument takes 10
readings and display the resulting average value. The
partial average is displayed during measurement.
Press the functional key to enable or disable this option.
SETUPSETUP
SETUPSETUP
SETUP

Hanna Instruments HI 88703 Specifications

General

Brand	Hanna Instruments
Model	HI 88703
Category	Measuring Instruments
Language	English