26
LOG AND LOG RECALLLOG AND LOG RECALL
LOG AND LOG RECALLLOG AND LOG RECALL
LOG AND LOG RECALL
The HI 88703 has a powerful log function that could store up to 200 records.
Each record contains:
•
the measuring range,
• the reading value,
• the measuring units,
• the date and time of the measurement,
• the current log number.
Notes: • The log can be saved only after a measurement is completed.
• A measurement can be saved only once.
LOG SAVE
To log a record, simply press LOG key after the
measurement is completed. A record number is
assigned to each logged measurement. Each
reading can be stored only once.
LOG RECALL
The log can be consulted at any time by simply
pressing RCL key.
To exit log consulting, press RCL key again.
The log content is displayed one record at a time,
starting with the most recent one. The information
regarding one record is displayed in one screen.
To browse the log press the UP or DOWN keys.
LOG DELETE
The last log or all logs can be deleted.
To delete the last log, simply press “Delete” functional key when the last log is displayed. The log
will be deleted and the next log is immediately displayed.
To delete all logs, press “DelAll” functional key. A
confirmation screen is displayed. Press “CFM”
functional key to confirm the action. The log will be
deleted and the instrument returns in the main screen.
Note: The records for all parameters are deleted
when this action is performed.
To Next Page
Loading...
Need help?
General
