31
REAGENT SETS
HI 93703-58 Silicon oil (15 mL)
HI 88703-11 Calibration set for turbidimeter(<0.1, 15, 100 750 and 2000 NTU)
OTHER ACCESSORIES
HI 731318 Tissue for wiping cuvets (4 pcs.)
HI 731331 Glass cuvets (4 pcs.)
HI 731335N Caps for cuvets (4 pcs.)
HI 740234 Replacement lamp for EPA turbidimeter (1 pcs.)
HI 92000 Windows
®
compatible software
HI 93703-50 Cuvets cleaning solution (230 mL)
ACCESSORIESACCESSORIES
ACCESSORIESACCESSORIES
ACCESSORIES
Before using this product, make sure that it is entirely suitable for your specific application and
for the environment in which it is used.
Operation of this instrument may cause unacceptable interferences to other electronic equipments,
requiring the user to follow all necessary steps to correct interferences.
Any variation introduced by the user to the supplied equipment may degrade the instrument’s
EMC performance.
To avoid damage or burns, do not put the instrument in microwave ovens. For your own and the
instrument safety do not use or store the instrument in hazardous environments.
RECOMMENDATIONS FOR USERSRECOMMENDATIONS FOR USERS
RECOMMENDATIONS FOR USERSRECOMMENDATIONS FOR USERS
RECOMMENDATIONS FOR USERS
WARRANTYWARRANTY
WARRANTYWARRANTY
WARRANTY
HI 88703 is warranted for two years against defects in workmanship and materials when used for
its intended purpose and maintained according to the instructions.
This warranty is limited to repair or replacement free of charge.
Damage due to accident, misuse, tampering or lack of prescribed maintenance is not covered.
If service is required, contact your dealer. If under warranty, report the model number, date of purchase,
serial number and the nature of the failure. If the repair is not covered by the warranty, you will be notified
of the charges incurred.
If the instrument is to be returned to Hanna Instruments, first obtain a Returned Goods Authorization
Number from the Customer Service Department and then send it with shipment costs prepaid. When
shipping any instrument, make sure it is properly packaged for complete protection.
To validate your warranty, fill out and return the enclosed warranty card within 14 days from the date of purchase.
To Next Page
Loading...
Need help?
General
