29
Beep On
Option: Enabled or Disabled.
This option is used to enable/disable the beeper.
Press the “Enable” functional key to enable or
disable this option.
When enabled, a short beep is heard every time a
key is pressed.
A long beep alert sounds when the pressed key is
not active or a error condition is detected.
Instrument ID
Option: 0 to 9999.
This option is used to set the instrument’s ID
(identification number). The instrument ID is used
while exchanging data with a PC.
Press “Modify” functional key to access the
instrument ID screen. Press the UP or DOWN keys
in order to set the desired value. Press “Accept”
functional key to confirm the value or ESC to return
to the setup menu without saving the new value.
Meter information
Press “Select” functional key to view the Instrument
model, firmware version, language version and
instrument serial number.
Press ESC to return to the Setup mode.
To Next Page
Loading...
