25 System Menu Items
Network
Data sharing options: Ethernet, Wi‑Fi, or Disabled
With connection established, IP assignment can be set as:
• Dynamic – IP Address, Gateway, Netmask, DNS Server are auto assigned
• Static – network details are entered manually
Input network information
1. Tap IP Address field.
2. Input address and tap
.
Connect to Ethernet
1. Connect cable to back of meter labeled Ethernet and to wall Ethernet outlet.
2. Tap Ethernet.
Connect to Wi‑Fi
1. Tap Wi‑Fi.
Note: every user must connect to Wi‑Fi individually.
2. Select the IP address type (Dynamic or Static).
3. Tap Press to select network.
4. Scan options and select preferred network.
Enter password if / when prompted.
5. Tap
to confirm.
Notes: With connection established, tap or to check IP address or verify connection status.
When attempting to connect
icon is displayed 5 sec. .
Connect & Print
Options: Connectivity, Printer
Connectivity
Tap
to enable (disable) following connectivity options:
•
FTP access to meter: log file transfer to an FTP site and meter FTP server connection to client (log download)
• Meter web server: log file download to a web client
To Next Page
Loading...
Need help?
General
