Hanna Instruments HI83300 - Page 56

56
• Add 0.5 mL of HI93753A‑0 Chloride Reagent A to each
cuvette using the 1 mL syringe
• Replace the caps and mix each cuvette by inverting for
approximately 30 seconds.
• Add 0.5 mL of HI93753B‑0 Chloride Reagent B to each
cuvette using the second 1 mL syringe.
• Replace the caps and mix each cuvette by inverting for
approximately 30 seconds.
• Place the cuvette with the reacted deionized water (#1)
into the holder and close the lid.
#1 #2
#1
#2
#1
CHLORIDE