8.3. RELATIVE mV CALIBRATION
• Press to accept the value.
• Press to cancel this operation and return to the previous screen.
• Press to delete the last digit.
8.4. LOGGING
Data logging is available in mV mode. It can be logging on demand (Manual Logging) or automatically (Interval Logging) at
predefined time intervals.
To customize the logging report:
• Press to display the Data Parameters screen.
• Highlight the Setup pH/mV/ISE Report option and press to display the Setup pH/mV/ISE Report screen.
• Use the and keys to highlight the data field that you want to show/hide in the pH/mV/ISE report and then press
to activate/deactivate it.
• Each field marked by “*” is an active field selected for the report.
• Press to save the customized report.
To Next Page
Loading...
